|
Instruction offered by members of the Department of Civil Engineering in the Schulich School of Engineering.
Department Head – R.C.K. Wong
Associate Heads – J.D. Hunt and L.H.J. Grozic
|
|
|
Civil Engineering
337
|
Tools for Civil Engineering Design
|
|
A course utilizing computer tools to solve practical Civil Engineering problems. The course concentrates upon the use of spreadsheets, but also involves interaction with databases, computer graphics and computer programming for analysis, design and reporting. Introduction to Autocad and basic surveying will round out the toolbox for civil engineers. Problems will normally be derived from several core Civil Engineering sub-disciplines.
Course Hours:
H(2-3)
Prerequisite(s):
Engineering 233.
|
| back to top | |
|
|
Civil Engineering
402
|
Water Resources Engineering
|
|
Review of basic concepts of fluid motion; Surface resistance and boundary layer theory, drag and lift, turbo machinery, flow in open channels, flow through pipes and networks, hydraulic structures and water; Topics in engineering hydrology; Reservoir modelling.
Course Hours:
H(3-2)
Prerequisite(s):
Mechanical Engineering 341.
|
| back to top | |
|
|
Civil Engineering
413
|
Introduction to Civil Engineering Materials
|
|
Engineering properties, materials science and applications of the Civil Engineering materials: strength, elasticity, fatigue, creep, shrinkage, durability, thermal deformation; introduction to fracture mechanics; Microstructure and fundamental principles underlying performance; mass transport processes, corrosion and phase transformations causing deterioration. Practical examples from difference materials sectors: steel, aggregates, cement, Portland cement concrete, masonry, asphalt concrete, natural and synthetic polymers.
Course Hours:
H(3-5/2)
Prerequisite(s):
Engineering 201.
|
| back to top | |
|
|
Civil Engineering
423
|
Geotechnical Engineering I
|
|
Identification and classification of soils; soil compaction; seepage; effective stress concept; stresses in a soil mass; settlement; one dimensional consolidation; shear stress and strength; introduction to slope stability; selected laboratory and design exercises with computer applications.
Course Hours:
H(3-1T-2)
Prerequisite(s):
Geology 471.
|
| back to top | |
|
|
Civil Engineering
451
|
Structural Engineering I
|
|
Review of analysis of statically determinate structures. Indeterminate structures, analysis of continuous beams using the three-moment equation. Structural building materials. Principles of structural analysis and design process. Loads on structures. Structural systems. Idealized models. Load paths for gravity lateral loads. Structural safety. Philosophy of limit states design. Design principles for main structural members in steel, plain and reinforced concrete/masonry, and timber.
Course Hours:
H(3-2T-1/2)
Prerequisite(s):
Civil Engineering 461.
|
| back to top | |
|
|
Civil Engineering
461
|
Mechanics of Solids and Structures
|
|
Analysis of statically determinate structures: reactions, member forces in trusses, bending moment, shearing force and axial force diagrams for frames; Introduction to indeterminate structures; Effects of moving loads, influence lines, Muller-Breslau principle; Determination of displacements using moment area theorems, energy theorems and virtual work; Maxwell's theorem; Normal stresses in non-symmetric sections; principal axes, shear centre; plastic torsion of circular shafts, torsion of non-circular sections; Principal stresses, failure theories; Elastic buckling of columns.
Course Hours:
H(3-1.5T)
Prerequisite(s):
Engineering 317.
|
| back to top | |
|
|
Civil Engineering
471
|
Project Management I
|
|
Introduces techniques that provide rational solutions to a range of project management decisions encountered in engineering projects. Students are expected to gain a detailed understanding of some; of the techniques, tools and processes available and their application in planning and managing engineering and construction projects; The course covers project management fundamentals including project planning and scheduling techniques, cash flow forecasting, performance evaluations and decision analysis; Introduction to operations research.
Course Hours:
H(3-2)
|
| back to top | |
|
|
Civil Engineering
473
|
Transportation Engineering I
|
|
|
Systems approach in transportation engineering and planning; Goals and objectives of urban and regional transportation planning; Introduction to transportation modes; Transportation demand models; Highway Alignment; Fundamentals of traffic flow; Highway capacity and level of service; Roadway intersection design and operation; Urban transportation technologies; Environmental and energy impacts of transportation.
Course Hours:
H(3-2)
Prerequisite(s):
Civil Engineering 471 and Engineering 319 or consent of the instructor.
|
| back to top | |
|
|
Civil Engineering
481
|
Environmental Engineering
|
|
Analyse and develop civil engineering solutions, at a conceptual level, to human health and environmental problems associated with human activities, fundamental aspects of air, water and land pollution, water quality assessment and control, environmental aspects of non-renewable energy development, introduction to sustainability concepts in construction and transportation, solid waste management technologies, introduction to land pollution prevention and control.
Course Hours:
H(3-2)
Prerequisite(s):
Chemistry 209 and Mechanical Engineering 341.
|
| back to top | |
|
|
Civil Engineering
502
|
Civil Engineering Aspects of Sustainable Communities
|
|
Definition of sustainability; global urbanization; emissions from transportation systems; economics of urban development from a civil infrastructure point of view, water/wastewater, land use/transportation; public transportation; travel demand management for sustainability; construction industry - energy use and emissions.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 473 and 481.
|
| back to top | |
|
|
Civil Engineering
504
|
Risk and Safety in Civil Engineering
|
|
Introduces fundamentals of uncertainty, risk, risk analysis, safety and decision-making in civil engineering. The course covers risk and safety issues related to planning, design, construction/implementation and operations. These issues are covered in the context of environmental, transportation, structures, geotechnical, natural hazards or other civil engineering disciplines.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 471.
|
| back to top | |
|
|
Civil Engineering
508
|
Environmental Aspects of Energy
|
|
Environmental assessment and management in the energy sector. Ecological footprint introduction. Site investigation, field techniques and program implementation, remedial planning and design, cost and time analysis, physical, chemical and biological remediation techniques, biomass and waste to energy, energy use and emissions in transportation systems, energy efficiencies and emissions in building construction, assess problems with energy use from an environmental setting, develop and apply engineered solutions, ecological and environmental footprints of energy industries.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 481.
|
| back to top | |
|
|
Civil Engineering
513
|
Structural Concrete Materials and Design
|
|
Practical examination of concrete mix design (Portland cement), processes and systems to improve performance and sustainability of Civil Engineering structures. Flexural design in reinforced concrete. Design of continuous beams and one-way slabs using moment coefficients. Shear design. Bond and development. Serviceability. Two-way slab systems: direct design method, punching shear. Columns. Design principles for concrete members reinforced with Fiber-Reinforced Polymers. Use of computer software for analysis and design of simple concrete structures.
Course Hours:
H(3-2T)
Prerequisite(s):
Civil Engineering 413 and 451.
|
| back to top | |
|
|
Civil Engineering
523
|
Geotechnical Engineering II
|
|
Sub-surface investigations; soil shear strength, critical states and laboratory tests; shallow and deep foundations in sands and clays; bearing capacity and settlement of structures; lateral earth pressures and retaining structures; seepage analysis; slope stability analysis, selected laboratory design exercises, solution to slope stability and other problems using computer programs.
Course Hours:
H(3-1T-2/2)
Prerequisite(s):
Civil Engineering 423.
|
| back to top | |
|
|
Civil Engineering
551
|
Structural Engineering II
|
|
Review of analysis of statically determinate structures. Static and kinematic indeterminacy. Principle of superposition. The force/flexibility and displacement/stiffness methods for the analysis of statically indeterminate structures. Calculation of displacements. Inelastic buckling of columns. Use of computers for the analysis of plane frames and grids. Plastic analysis of continuous beams, frames and plates. Yield line theory.
Course Hours:
H(3-2T)
Prerequisite(s):
Civil Engineering 451.
|
| back to top | |
|
|
Civil Engineering
557
|
Structural Steel Design
|
|
Principles of limit states design of steel structures. Floor systems, resistance to horizontal forces. Properties of steel. Tension members. Eccentrically-loaded bolted and welded connections; connection details. Axially-loaded compression members. Laterally unsupported beams. Members subjected to bending and axial forces; beam-column effect. Composite beams. Plate girders. Design of a simple steel structure and use of available computer software to assist in analysis and design of steel structures.
Course Hours:
H(3-2T)
Prerequisite(s):
Civil Engineering 451 and 551.
|
| back to top | |
|
|
Civil Engineering
565
|
Project Management II
|
|
|
Introduces fundamentals of engineering and construction management techniques, tools and processes. The course covers understanding of design and contract documents, estimating and cost control; project organizations, design of temporary facilities including formwork and safety related matters, construction processes, dispute resolution, social, economic and environmental impacts, regulatory requirements, project completion and commissioning.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 471.
|
| back to top | |
|
|
Civil Engineering
570
|
Group Design Project
|
|
|
Team design project applying engineering and project management principles to civil engineering design problems; Consideration of technical, resource allocation and business aspects of project; Development of project scope, design, specifications, scheduling and documentation; Elements of practical team management and leadership; Specific guidance provided by academic and industry advisors.
Course Hours:
F(0-4)
Prerequisite(s):
Civil Engineering 402, 413, 423, 451, 461, 471, 473, and 481 or consent of the Department.
Notes:
Departmental consent will only be granted in exceptional cases if students are missing no more than one of the courses listed above.
|
| back to top | |
|
|
Civil Engineering
571
|
Introduction to Road Safety
|
|
Theory and evidence in accident analysis and prevention. Topics include Haddon's matrix, crash data analysis, traffic enforcement, road safety advertising, fleet safety, road safety audits, vehicle safety and program evaluation.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 473 and Engineering 319.
|
| back to top | |
|
|
Civil Engineering
575
|
Transportation Engineering II
|
|
|
This course is intended to introduce students to the fundamentals of how various transportation systems are designed and operated. Topics to be covered include: public transit design and operation, highway engineering and design, airport design, traffic system design and operations, before and after studies and Intelligent Transportation Systems.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 471 and 473 and Engineering 319 or equivalent.
|
| back to top | |
|
|
Civil Engineering
581
|
Environmental Engineering II
|
|
|
Water and wastewater quantities and quality, water distribution and wastewater collection systems, hydraulic considerations, design of sanitary sewers, storm drainage systems, physical, chemical, and biological processes for water and wastewater treatment; aeration, coagulation, flocculation, sedimentation, single and multi-media filtration, disinfection, activated sludge system and trickling filter, adsorption, reverse osmosis, membrane filtration, advanced oxidation, sludge processing and disposal, industrial water and wastewater treatment, water conservation, reuse and recycling.
Course Hours:
H(3-1)
Prerequisite(s):
Civil Engineering 481 and Mechanical Engineering 341.
|
| back to top | |
|
|
Civil Engineering
595
|
Special Topics
|
|
Current topics in Civil Engineering.
Course Hours:
H(3-1)
Prerequisite(s):
Consent of the Department Head.
MAY BE REPEATED FOR CREDIT
|
| back to top | |
|
|
Civil Engineering
597
|
Civil Engineering Project I
|
|
Individual work on an assigned Civil Engineering topic under the supervision of a faculty member. The project will normally involve a literature review, theoretical and laboratory or field work. Submission of a mid-term progress report defended orally and a final report.
Course Hours:
H(0-5)
Notes:
Open to students who have completed the third year Civil Engineering program with a GPA of 3.00 or better and/or Department Heads approval.
|
| back to top | |
|
Graduate Courses
Registration in all courses requires the approval of the Department of Civil Engineering. For a more complete listing of Environmental Engineering graduate courses look under Environmental Engineering.
|
|
Civil Engineering
601
|
Graduate Research Seminar
|
|
Reports on studies of the literature or of current research.
Course Hours:
Q(32 hours)
MAY BE REPEATED FOR CREDIT
NOT INCLUDED IN GPA
|
| back to top | |
|
|
Civil Engineering
611
|
Bituminous Materials
|
|
Origin of bituminous materials. Production, composition, and internal structure. Natural and petroleum-refined bituminous materials. Characteristics of bituminous materials and their measurement. Basic material and rheological tests. Application of bituminous materials in asphalt paving technologies. Hot mixes and asphalt emulsions. Paving mix design, properties and testing. Main failure modes of asphalt pavements. Industrial asphalts. Environmental impacts of asphalt technologies.
Course Hours:
H(3-1)
|
| back to top | |
|
|
Civil Engineering
615
|
Rheology of Engineering Materials
|
|
Elements of tensor calculus. Constitutive equations. Linear and non-linear viscoelasticity. Dielectric properties of materials. Rheometry. Temperature and molecular mass dependencies of material functions. Relations between material functions. Microstructure and rheology of materials.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
617
|
Fracture of Civil Engineering Materials
|
|
Cohesive strength; plasticity. Fracture mechanics in relation to structural steel, stress intensity, fracture toughness, energy release rate, LEFM, COD, J-Integral, R-Curve, fatigue. Compressive fracture of concrete, masonry and rocks; cracking patterns, fracture theories, damage models, test methods and effects.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
619
|
Special Problems
|
|
Designed to provide graduate students, especially at the PhD level, with the opportunity of pursuing advanced studies in particular areas under the direction of a faculty member. Students would be required to consider problems of an advanced nature.
Course Hours:
H(3-0)
MAY BE REPEATED FOR CREDIT
|
| back to top | |
|
|
Civil Engineering
621
|
Computer Analysis of Structures
|
|
Review of the displacement method of structural analysis, energy theorems, and transformation of force and displacement matrices. Computer analysis of framed structures: banded stiffness matrices, assemblage of stiffness matrices, displacement and support conditions and calculation of reactions, solution of banded equations. Structural symmetry, anti-symmetry and cyclic symmetry. Analysis of large structures by substructuring. Analysis of shear wall structures. Introduction to the finite element method: displacement functions, stiffness matrix formulation, consistent load vectors, isoparametric elements. Non-linear analysis: effect of axial forces combined with large displacements, geometric stiffness matrix, Newton-Raphson techniques, examples of geometric non-linearity, non-linear buckling, cable networks including membrane elements, analysis of structures made of non-linear materials. Structuring and composition of available structural analysis computer programs, and their applications.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
623
|
Behaviour and Design of Reinforced Concrete Members
|
|
Behaviour and strength of reinforced concrete members; materials; safety; design of members subjected to flexure, compression, compression and flexure including biaxial bending, shear, torsion; bond and anchorage; slender columns; deep beams; serviceability; rotation capacity; relation between results of research and current design codes.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
627
|
Serviceability of Concrete Structures: Advanced Topics
|
|
Material properties affecting serviceability: creep and shrinkage of concrete and relaxation of prestressed steel. Displacement method of analysis of strains and stresses due to temperature, creep and shrinkage; composite sections; cracked sections. Time-dependent internal forces; effects of loading, prestressing and construction in stages. Displacements of cracked members; crack spacing; stabilized cracks; force-induced and displacement-induced cracking. Deflections of beams, frames, slabs and floor systems. Non-linear effects of cracking on internal forces. Effects of temperature. Fatigue of cracked prestressed members. Corrosion; effects of cracking. Serviceability considerations of miscellaneous structures, e.g., bridges, water-retaining structures and pavements.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
629
|
Computational Modelling of Concrete Structures
|
|
Discussion of linear finite element analysis; non-linear analysis and iterative techniques; constitutive relations and failure theories; modelling of reinforcement and prestressing; cracking models and post-cracking behaviour; tension stiffening and strain softening; models for shear transfer; time-dependent effects of creep, shrinkage and temperature; behaviour under cyclic loading and dynamic effects; numerical examples and computer applications on analysis of beams, frames, slabs, shear panels and walls, thin shells, axisymmetric solids and three dimensional structures.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
633
|
Fibre Reinforced Polymers for Construction and Repair of Structures
|
|
Properties and behaviour of various types of Fibre-Reinforced Polymers (FRP) materials. Limit States Design, procedures and design philosophy of structures reinforced or strengthened with FRP. Flexural and shear design. FRP systems for flexural and shear strengthening of structures. Axial strengthening of columns. Concrete prestressed with FRP. Durability and fire resistance, blast mitigation and repair using FRP. Case studies and field applications.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
635
|
Behaviour and Design of Prestressed Concrete Bridges and Other Structures
|
|
Forces due to prestressing in statically indeterminate structures such as continuous beams, frames, slabs, using load balancing method, force method and prestressing influence coefficients. Limit analysis of continuous prestressed concrete structures. Design of prestressed flat slabs. Initial and time-dependent deflections. Effect of creep and shrinkage in statically indeterminate structures; effect of differential settlement; creep behaviour of structures made continuous by cast-in situ concrete. Discussion of various types of prestressed concrete bridges; selection of cross-section, pier arrangement, abutments, approach slab, bearings. Loads. Design of skew and curved bridges. Cable layout in skew and curved bridges. Methods of bridge construction. Aesthetic considerations in bridge design.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
637
|
Behaviour and Design of Prestressed Concrete Members
|
|
Flexural analysis and design of prestressed and partially prestressed concrete members based on stresses, deflections and strength. Design of members subjected to shear, torsion, compression or tension. Fire resistance. Composite members. Bond and anchorage zones. Prestressing losses and time-dependent deformations. Discussion of current design standards.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
639
|
Structural Dynamics
|
|
Numerical analysis of simple systems; rigorous analysis of one-degree systems; lumped mass multi-degree systems and structures with distributed mass and load; approximate analysis and design methods; earthquakes, blast-resistant design, beams subjected to moving loads; calculation of results by analog and digital computer.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
641
|
Seismic Analysis and Design
|
|
Introduction to seismology, ground movements, typical accelograms. Response spectra for linear and non-linear responses, role of damping and inelastic behaviour. Equivalent lateral load for design, code requirements. Structural design concepts to mitigate seismic effects. Design of steel structures for earthquake motions. Design of concrete frames and walls for earthquake motions.
Course Hours:
H(3-0)
Prerequisite(s):
Civil Engineering 639.
|
| back to top | |
|
|
Civil Engineering
643
|
Structural Masonry Design
|
|
Component materials and their properties, masonry properties, quality control, plain and reinforced masonry, beams, walls, slender walls, columns, load-moment interaction curves, concentrated load bearing, shear load distribution, shear walls, code provisions, building envelope, detailing, differential movement, geometric walls, prestressed masonry, arches.
Course Hours:
H(3-0)
Antirequisite(s):
Not open to students with credit in Civil Engineering 553 or 595.05.
|
| back to top | |
|
|
Civil Engineering
645
|
Risk Analysis
|
|
The objective of this course in engineering risk analysis and risk assessment is to familiarize students with the principles and techniques of quantitative risk analysis. Key focus points are the treatment of uncertainties, the attitude of conservatism, risk perception, the careful use of quantitative risk measures, and a discussion of the dangers tasks facing risk-based decision makers. Includes: Hazards, risk, risk analysis, risk assessment; risk measures; probability, uncertainty modelling, stochastic variables; using and misusing data, reliability, tails; risk assessment frameworks, models in health and environmental risk analysis, models in engineering risk analysis; risk perception, risk comparison; and practical case studies.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
647
|
Structural Reliability Techniques
|
|
The concepts of risk and reliability, uncertainties, and engineering decision making. Focuses on both aspects of uncertain systems, mainly structures, but also soils and environments, namely analysis and design. Techniques for structural reliability-based design and optimization are discussed and supplemented by practical applications.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
649
|
Stochastic Dynamics
|
|
Basic topics in probability theory. Random processes: time and frequency domain characteristics, differentiation and integration, stationary and ergodic processes; review of basic structural dynamics; random structural vibrations on simple oscillators and multiple degree-of-freedom systems. Response of linear and non-linear systems; examples; threshold crossing, extreme peaks, reliability; applications in earthquake and offshore engineering.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
651
|
Finite Element Modelling
|
|
Terminology. Conceptual framework of method; shape function; continuity at nodes; numerical integration; matrix assembly; solution methods; sources of error and poor performance; mesh sensitivity; element types, their selection and behaviour; use of software.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
653
|
Theory and Applications of the Finite Element Method
|
|
Theory of the finite element method with emphasis on applications to structural analysis. Scope of the method, use of basic equations of elasticity, displacement (stiffness) method of analysis, energy theorems applied to finite elements, element matrices; the isoparametric formulation; applications in structural analysis, heat conduction and other non-structural problems. Use of available finite element programs for analysis of space frames, plates subjected to in-plane forces, plates in bending, spatial structures and heat transfer.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
655
|
Numerical Methods for Modelling Geomaterials
|
|
Methods of theoretical analysis for solving partial differential equations associated with Geotechnical and Structural Engineering. Variational Principles, Principle of Virtual Work and Galerkin Method. Theory of finite element and focus on its computer implementation for analysis of engineering problems. Typical applications include two- and three-dimensional stress analysis, seepage flow, and coupled fluid flow-solid deformation problems. Advanced topics: numerical strategies for solving material and geometric non-linearities (plasticity and large deformations), poro-elasticity and plasticity, strain localization, and presentation of other numerical techniques such as finite difference, boundary element, discrete element methods.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
665
|
Fundamentals of Soil Behaviour
|
|
Principle of effective stress in saturated soil, unsaturated soil and clay. Engineering properties of soils. Shear strength and deformation characteristics of soils in static, cyclic, drained and/or undrained loading. Laboratory testing of soils. One-dimensional consolidation, poro-elastic deformation, swelling mechanism, time-dependent deformation and soil contamination in soils.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
667
|
Applied Rock Engineering
|
|
Engineering properties of intact rock and rock mass. Rock classification. Slope and underground excavation; groundwater flow in fractured rock; poro-elastic deformation analyses; hydraulic fracturing.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
671
|
Advanced Foundation Engineering
|
|
Design and analysis of foundations. Spread footings, rafts, piled foundations. Marine foundations. Foundations in difficult soils. Embankments, retaining walls, excavations. Soil improvement. Soil liquefaction. Design problems and computer applications in foundation engineering.
Course Hours:
H(4-0)
|
| back to top | |
|
|
Civil Engineering
673
|
Constitutive Laws for Geomaterials
|
|
Definition of a continuous medium. Description of deformable continuous media; concepts of stress, strain and their invariants. Constitutive equations geomaterials as a generic for soil, rock and concrete materials in civil engineering. Review of elasticity theory. Introduction to yielding, plastic flow and failure phenomena in geomaterials. Limit analysis with applications to both geotechnical and structural engineering. Stress-strain behaviour for both cohesive and granular materials. Constitutive models based on critical state theory will be presented. Other topics such as strain localization and fracture phenomena may be included as appropriate.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
689
|
Advanced Project Management Practices and Principles
|
|
Advanced practices, tools and concepts in managing complex volatile or large projects. SMART project management based on best practices in diverse industries forms the basis of this course.
Course Hours:
H(3-0)
Prerequisite(s):
Civil Engineering 691, 697 and consent of the Program Director.
|
| back to top | |
|
|
Civil Engineering
691
|
Fundamentals of Project Management
|
|
Application of management principles to the project environment; planning, control, scope, time and cost processes; project organization and human resource issues. Students review aspects of a current major capital project and submit and defend a project report.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Program Director.
Also known as:
(Business and Environment 691)
|
| back to top | |
|
|
Civil Engineering
693
|
Project Engineering Management
|
|
Role of the engineering manager in the project management team. The engineering firm, its organization and function; project development, engineering project control; design control; scope and estimate control; engineering interfaces with procurement and construction; engineering responsibility in project commissioning start-up and operations.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Program Director.
|
| back to top | |
|
|
Civil Engineering
695
|
Project Construction Management
|
|
Role of the construction manager in the project management team; project options for the management of construction; managing the contractor's business; labour relations; claims; contractor(s) responsibility in project commissioning start-up and operations.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Program Director.
|
| back to top | |
|
|
Civil Engineering
697
|
Project Planning and Control
|
|
Strategic and tactical planning; planning for scope, quality, time and cost; selection and implementation of project management information system; economic and risk analysis; planning for construction labour relations.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Program Director.
|
| back to top | |
|
|
Civil Engineering
699
|
Law for Project Managers
|
|
Legal issues related to the effective management of projects. Introduction to the legal system and processes; environmental law; intellectual property non-disclosure; professional liability; contract law; strategic alliances; employment law; the builder's lien act. Cases are reviewed and students are expected to complete a number of assignments requiring research into case law.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Program Director.
Notes:
This course may not be taken for credit towards the JD or LLM degrees.
|
| back to top | |
|
|
Civil Engineering
703
|
Fundamentals of ITS and Transportation System Performance
|
|
Definition of ITS, with particular emphasis on advanced traffic management and control and advanced traveler information issues; traffic assignment and dynamic traffic assignment, traffic simulation tools; various traffic flow models: from microscopic to macroscopic traffic flow theory; traffic and incident management; surface street control; freeway control.
Course Hours:
H(3-0)
Prerequisite(s):
An undergraduate degree in engineering or instructor approval.
|
| back to top | |
|
|
Civil Engineering
705
|
Traffic Engineering
|
|
Traffic stream characteristics, related field surveys; advanced probability distributions of headway, flow and speed under peak, off-peak, platoon-flow conditions; analysis of density contours; the generalized car-following model, related macro-models of traffic streams, practical applications; Traffic incident analysis; Two-lane highways; actuated and pretimed traffic signals; two-way coordination of signals; introduction to network controls.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
707
|
Theory of Transport Demand Modelling
|
|
Modelling for transport planning; data in transport modelling; trip generation modelling; trip distribution modelling; modal split modelling; direct demand models; traffic assignment; equilibrium in transport modelling; discrete-choice models; specification and estimation of logit models; aggregation issues; simplified transport demand models; model updating and transferability.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Department.
|
| back to top | |
|
|
Civil Engineering
709
|
Practice of Transport Demand Modelling
|
|
Sample enumeration modelling; practical aspects of logit model estimation and calibration; disaggregate choice behaviour data; practical four-step transport demand modelling using conventional software packages; application of computer-based network assignment models.
Course Hours:
H(2-4)
Prerequisite(s):
Civil Engineering 707 or consent of the Department.
|
| back to top | |
|
|
Civil Engineering
711
|
Advanced Analysis and Modelling of Public Transit Systems
|
|
Role of public transport in a city; concepts of public and private benefits; economies of scale; main modes of urban public transport systems: rail, bus, van and other vehicles; advanced mathematical modelling of mode of operation, route alignment, access, station and stop location, transfer protocols, time table, vehicle and fleet size, reliability; concepts of utility and value of time; detailed functional design and optimization of a bus route, rail line; bus, rail and metro networks.
Course Hours:
H(3-0)
Prerequisite(s):
An undergraduate degree in engineering or instructor approval.
|
| back to top | |
|
|
Civil Engineering
713
|
Mountain Highway Engineering
|
|
Road vehicle performance in mountainous terrain; the slow moving vehicle problem; highway capacity and level of service; terrain classification; alignment elements, cross section elements, intersections, traffic barriers; planning and design of passing lanes, climbing lanes, truck escape ramps, turnouts, and low-volume roads; traffic management in avalanche zones; environmental impact of highways in mountainous terrain. Vehicle operating costs; engineering evaluation of mountain highway projects.
Course Hours:
H(3-1)
|
| back to top | |
|
|
Civil Engineering
715
|
Transport Economics
|
|
Economic characteristics of transport; movement and location; transport demand; direct costs of transport; the value of travel time; external costs of transport; shadow prices; pricing of transport services; containment of external costs of transport; private and public sector investment analysis in transport; transport and economic development; transport policy.
Course Hours:
H(3-0)
Prerequisite(s):
Consent of the Department.
|
| back to top | |
|
|
Civil Engineering
721
|
Modelling for Water Supply and Distribution
|
|
Planning and management of water supply systems. Components of water supply systems. Water supply systems. Water demand forecasting. Simulation modelling of water distribution systems. Design of water distribution systems. Operational control and pump scheduling. Reliability and security of supply. Water losses and leakage control. Water pricing and water conservation. Introduction to optimization.
Course Hours:
H(2-1)
Prerequisite(s):
Civil Engineering 581 or consent of the Department.
Notes:
Not open to students with credit in Civil Engineering 619.52 or 719.
|
| back to top | |
|
|
Civil Engineering
723
|
Hydrological Theory and Design
|
|
Overview of physical and statistical hydrology. Theory of unsteady flow, simplified equations, applications in overland flow and channel flood routing using numerical techniques. Linear theory of hydrologic systems, instantaneous unit hydrograph. Precipitation analysis, probable maximum precipitation, design storms. Design flood hydrograph studies, application of the Soil Conservation Service method. Statistical analysis of hydrological variables, some probability distributions and their applications: regionalization, droughts, reservoir yield analysis and introduction to stochastic modelling.
Course Hours:
H(3-3)
Prerequisite(s):
Civil Engineering 533 or equivalent.
|
| back to top | |
|
|
Civil Engineering
741
|
Biological Processes for Wastewater Treatment
|
|
Specialized biological wastewater treatment processes for removal of impurities not effectively removed by conventional secondary wastewater treatment systems, such as nutrients (e.g. nitrogen and phosphorus), residual organics, residual solids, bacteria and viruses. Wetlands. Activated sludge modelling. Biological nutrient removal. Sludge management. Disinfection.
Course Hours:
H(3-0)
Notes:
Credit for both Civil Engineering 741 and Environmental Engineering 663 will not be allowed.
Also known as:
(Environmental Engineering 663)
|
| back to top | |
|
|
Civil Engineering
743
|
Computational Methods for Environmental Engineering
|
|
Taylor series, numerical integration. Linear and non-linear algebraic equations and solvers. Ordinary and partial differential equations. Finite difference methods: explicit, implicit and Crank-Nicholson methods. Finite difference, finite element or finite volume numerical approximations. Initial and boundary value problems. Boundary conditions, discretization considerations, and design of approximations, accuracy and error reductions. Applications in environmental engineering, such as pollutant dispersion and transport, will be discussed.
Course Hours:
H(3-0)
Notes:
Credit for both Civil Engineering 743 and Environmental Engineering 625 will not be allowed.
Also known as:
(Environmental Engineering 625)
|
| back to top | |
|
|
Civil Engineering
745
|
Hazardous Waste and Contaminated Sites Management
|
|
Integrated waste management. Functional and fundamental properties of hazardous waste. Toxicological properties of contaminants. Contaminant release mechanisms. Fate and transport of contaminants in the environment. Contaminated site assessment principles. Quantitative human health risk assessment (QHHRA) as applied to contaminated sites. Hazard identification, exposure pathway analysis, risk characterization. Risk management and site remediation. Methods of hazardous waste treatment and contaminated site remediation. Secure land disposal of hazardous waste and contaminated soils and sludges.
Course Hours:
H(3-0)
Notes:
Credit for both Civil Engineering 745 and Environmental Engineering 655 will not be allowed.
Also known as:
(Environmental Engineering 655)
|
| back to top | |
|
|
Civil Engineering
747
|
Contaminated Soil Remediation
|
|
Overview of soil remediation engineering. Contaminant partitioning in air, water and gas phases. Phases of site assessments, Physical and chemical treatment processes, soil vapour extraction, air sparging, soil washing, soil flushing, thermal desorption and incineration, solidification and stabilization, vitrification, biological treatment processes, bioremediation kinetics, ex situ and in situ techniques. Liquid phase bioremediation as it pertains to soil remediation.
Course Hours:
H(3-0)
Notes:
Credit for both Civil Engineering 747 and Environmental Engineering 653 will not be allowed.
Also known as:
(Environmental Engineering 653)
|
| back to top | |
|
|
Civil Engineering
749
|
Environmental Aspects of Waste Disposal Systems
|
|
Soil-chemical interactions and implications in waste disposal system design; landfill design principles; leachate production, leachate migration in the unsaturated/saturated zones; analytical and numerical solution of flow and transport equations; applications and case studies of groundwater contamination; design and construction of barrier systems; bioreactor landfills; landfill closure issues; greenhouse gas control systems.
Course Hours:
H(3-0)
Notes:
Credit for both Civil Engineering 749 and Environmental Engineering 651 will not be allowed.
|
| back to top | |
|
|
Civil Engineering
751
|
Snow Avalanche Hazard Mitigation
|
|
Avalanche motion and protection including avalanche terrain, frictional flow, impact pressures, avalanche risk for fixed structures, elements of structural defence, and run-out estimation based on statistical models, dynamic models, air photo interpretation, field studies of vegetation and historical records.
Course Hours:
H(3-0)
|
| back to top | |
|
|
Civil Engineering
753
|
Snow Avalanche Formation and Release
|
|
Snowpack properties and processes including meteorological and ground effects on the snowpack, energy balance at the snow surface, snowpack stratigraphy, metamorphism of snow grains, bonding, as well as spatial and temporal variability of the snowpack. Avalanche initiation including deformation and failure of weak layers, models of slab failure and fracture propagation. Concepts of snow stability, avalanche forecasting and avalanche risk for recreationists.
Course Hours:
H(3-0)
|
| back to top | |
|
COURSES OF INSTRUCTION