Chemical Engineering ENCH

ENCH 101 106 315 331 401 403 405 421 423 427 429 501 503 505 511 519 531 535 537 539 551 601 607 609 613 615 617 619 620 621 623 625 627 629 631 633 639 643 645 647 649 651 653 657 659 661 665 677 687 689 698 699 701 703

Instruction offered by members of the Department of Chemical and Petroleum Engineering in the Schulich School of Engineering.

Department Head 鈥� I. Gates

Associate Heads 鈥� M. Foley, A. De Visscher

Chemical Engineering 101

Computing Tools

A programming course for second year chemical and oil & gas engineering students, which will describe practical introductions to software tools used by chemical and petroleum engineers, as well as to specific chemical and oil & gas engineering applications.
Course Hours: 3 units; H(32)
Prerequisite(s): Engineering 233.
Antirequisite(s): Credit for both Chemical Engineering 101 and 001 will not be allowed.
NOT INCLUDED IN GPA

Chemical Engineering 106

Dynamic Simulation Workshop

Introduction to process control: general concepts and terminology; developing first鈥損rinciples dynamic models of simple unit operations; conventional control systems and hardware; dynamic simulation of open- and closed-loop chemical processes using commercial simulation software.
Course Hours: 3 units; H(32)
Notes: Required for all Chemical Engineering students (Regular, with Petroleum Minor and all Specializations).
NOT INCLUDED IN GPA

Senior Courses

Chemical Engineering 315

Chemical Engineering Process Calculation

Material and energy balances of physical and chemical systems for steady state and transient conditions. Introduction to analysis and synthesis of chemical processes.
Course Hours: 3 units; H(3-1)
Corequisite(s): Engineering 311.

Chemical Engineering 331

Process Fluid Dynamics

Fluid Properties; Newtonian and non-Newtonian fluids. Fluid statics. Bernoulli equation; derivation and applications. Control volume and system representation. Differential analysis of Flows. The Navier-Stokes equation; applications. Dimensional analysis. Flow in conduits; laminar and turbulent flows; single-pipe and multiple-pipe systems. Forces on immersed bodies; fluidization. Metering.
Course Hours: 3 units; H(3-1T-3/2)
Prerequisite(s): Engineering 201 and 202; and Mathematics 277 or Applied Mathematics 219; and Mathematics 375 or Applied Mathematics 307.

Chemical Engineering 401

Analyses of Chemical, Oil and Gas Engineering Processes

Partial differential equations in different coordinate systems. Approximate and exact methods of solving equations. Similarity transform, Separation of variables. Laplace transform. Fourier series and Sturm-Liouville systems. Analysis and solution of steady state and transient diffusion problems including Fourier, Darcy and Fick's law analogies. Application to energy transfer in solids and pressure propagation in reservoirs.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Chemical Engineering 331 and Mathematics 375 or Applied Mathematics 307.
Corequisite(s): Chemical Engineering 403.

Chemical Engineering 403

Heat Transfer

A study of concepts involved in heat transfer. Applications of continuity and energy equations. Boundary layer theory. Conduction, convection and radiation heat transfer. Boiling and condensation. Evaporation. Heat exchanger calculations.
Course Hours: 3 units; H(3-1T-4/2)
Prerequisite(s): Mathematics 375 or Applied Mathematics 307 and Chemical Engineering 331.
Corequisite(s): Chemical Engineering 401.

Chemical Engineering 405

Separation Processes I

Diffusion and convective mass transfer. Staged and continuous contacting. Solid-liquid and liquid-liquid extraction, distillation, absorption and stripping.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Chemical Engineering 403 and 427.

Chemical Engineering 421

Chemical Engineering Kinetics

Kinetics of homogeneous reactions and the interpretation of kinetic data; design of single and multiple reactors for simple, simultaneous and consecutive reactions; influence of temperature, pressure and flow on reactions and reactor design; introduction to heterogeneous reaction systems and catalyzed fluid reactions.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Chemical Engineering 403 and Chemistry 357.
Corequisite(s): Chemical Engineering 405.

Chemical Engineering 423

Chemical Engineering Process Development

Design of chemical processing units and plants; cost estimates and chemical process economics; optimization techniques; introduction to linear programming. Safety and environmental considerations in process design.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Chemical Engineering 315.
Antirequisite(s): Credit for both Chemical Engineering 423 and Petroleum Engineering 423 will not be allowed.

Chemical Engineering 427

Chemical Engineering Thermodynamics

Review of first and second law principles; application to the properties of fluids and solutions; vapour liquid equilibria; the third law; applications to chemical equilibrium and chemical reactions.
Course Hours: 3 units; H(3-1T-1)
Prerequisite(s): Engineering 311 and Chemical Engineering 315.

Chemical Engineering 429

Process Dynamics and Control

Mathematical models describing transient response characteristics of basic process elements; use of a dynamic process simulator; block flow diagram of a feedback control loop; process control hardware; basic control modes; tuning feedback controls; cascade control; feedforward control; common control loops; distillation column control; design of multiple single loop controllers; plant wide modelling and control.
Course Hours: 3 units; H(3-2T-3/2)
Prerequisite(s): Chemical Engineering 315, 331 and 401.
Corequisite(s): Chemical Engineering 405.
Antirequisite(s): Credit for both Chemical Engineering 429 and 529 will not be allowed.

Chemical Engineering 501

Transport Phenomena

Simplification, scaling and dimensional reasoning. Error estimation. Heat, mass and momentum transfer analyses. Convective-Diffusive transport in open and porous media. Systems and process modelling. Analytical solutions by the lumped, integral and differential techniques.
Course Hours: 3 units; H(3-1T-1)
Prerequisite(s): Chemical Engineering 401.

Chemical Engineering 503

Crude Oil Upgrading and Refining

Upgrading objectives; analysis and composition of non-distillable material and its relationship to upgrading; upgrading processes; refinery products and specifications. Conventional, heavy oil and bitumen upgrading technology.
Course Hours: 3 units; H(3-1T)
Prerequisite(s): Third-year standing, or higher, in Chemical Engineering or Oil and Gas Engineering.

Chemical Engineering 505

Separation Processes II

Concepts in mass transfer including molecular diffusion, mass transfer rates, and mass transfer coefficients. Application of these and other fundamental concepts in chemical engineering to develop process design specifications for various unit operations which may include: crystallization, humidification and cooling, drying, adsorption, and membrane processes.
Course Hours: 3 units; H(3-1T-1)
Prerequisite(s): Chemical Engineering 405.

Chemical Engineering 511

Chemical Process Design I

Team design project applying principles of process engineering and project management; Gantt charts; critical path method; process simulation, degrees of freedom analysis; considerations in process selection; plant location; block flow diagrams; process flow diagrams; short cut process equipment design/sizing procedures; preliminary equipment cost estimating techniques.
Course Hours: 3 units; H(3-4)
Prerequisite(s): Chemical Engineering 405, 421, 423 and 429.
Antirequisite(s): Credit for both Chemical Engineering 511 and Petroleum Engineering 511 will not be allowed.
Notes: Restricted to Chemical Engineering students only. Consent of department required for non-U of C students.

Chemical Engineering 519

Special Topics

Current advanced topics in Chemical Engineering.
Course Hours: 3 units; H(3-1T)
Prerequisite(s): Consent of the Department.
MAY BE REPEATED FOR CREDIT

Chemical Engineering 531

Chemical Process Design II

Team design project continuing from Chemical Engineering 511. Detailed design of large commercial plants involving the preparation of a process and instrumentation diagram; emphasis on computer design procedures; specification sheets for chemical processing equipment such as separators, pumps, compressors, columns and process piping. Other topics include operational considerations in design, plant safety; relief system design; waste treatment and pollution control processes; plant and equipment plot plans; control and computer simulation.
Course Hours: 3 units; H(2-6)
Prerequisite(s): Chemical Engineering 511.

Chemical Engineering 535

Principles of Biochemical Engineering

Introduction to biochemistry, enzyme kinetics and cell growth and metabolism. Aspects of mass transfer, heat transfer and fluid flow related to the design of biological process equipment. Fermentations, sterilization and extraction techniques. Treatment of effluents. Introduction to bio-reactor design and scale-up. Introduction to process instrumentation and control.
Course Hours: 3 units; H(3-2/2)
Prerequisite(s): Chemistry 357.

Chemical Engineering 537

Computational Thermodynamics

Amalgamation of thermodynamic models and computational techniques with application to industrially important thermodynamic problems such as multi-component flash calculations, reacting systems, phase stability and gas hydrates.
Course Hours: 3 units; H(3-1T)
Prerequisite(s): Chemical Engineering 427.

Chemical Engineering 539

Polymer Engineering

Introduction to polymer science and technology. Molecular structure, processing, rheology, thermal, physical and mechanical properties. Synthetic polymers used in biomedical, manufacturing and other advanced technological applications.
Course Hours: 3 units; H(3-1T)
Prerequisite(s): Chemical Engineering 403.
Corequisite(s): Prerequisite or Corequisite: Chemistry 357.

Chemical Engineering 551

Chemical Engineering Laboratory

Experiments which demonstrate the operation of chemical process equipment involving heat and/or mass transfer, or kinetics. Lectures will cover experimental design and applied statistics.
Course Hours: 3 units; H(1-4/2)
Prerequisite(s): Chemical Engineering 405.
Corequisite(s): Chemical Engineering 505 or Biomedical Engineering 500 or 501.
Antirequisite(s): Credit for both Chemical Engineering 551 and Petroleum Engineering 551 will not be allowed.

Graduate Courses

Chemical Engineering 601

Research Seminar

Introduction to health and safety. Supervisory relationships. Respect in the lab. Reference gathering and management. Presentation skills. Writing and publishing skills for scientific manuscripts and abstracts. Career development skills. Intellectual property. Reports on studies of current research in the Department.
Course Hours: 0.75 units; E(3S-0)
MAY BE REPEATED FOR CREDIT NOT INCLUDED IN GPA

Chemical Engineering 607

Natural Gas Processing Principles

Physical and chemical properties of natural gases; vapour-liquid equilibrium data and computations; flow of gas and gas-liquid mixtures; separation of gaseous mixtures; heat transfer in gas processing; production of natural gas and its associated liquids.
Course Hours: 3 units; H(3-0)
Notes: This course does not count towards the degree requirements of MSc and PhD students.

Chemical Engineering 609

Natural Gas Processing Technology

Design and operational criteria in transporting and processing of natural gas; refrigeration and compression; cryogenics; hydrocarbon dew point control; LPG recovery; sulphur recovery; mechanical flow diagrams; process simulation.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Chemical Engineering 607.

Chemical Engineering 613

Advanced Topics in Mass Transfer

Advanced concepts in mass transfer in multiphase systems. Mass transfer with simultaneous chemical reaction and heat transfer.
Course Hours: 3 units; H(3-0)

Chemical Engineering 615

Model Predictive Control

Review of process dynamics and control fundamentals (step response curves, PID control structures and PID controller tuning). Identification of finite impulse response models from plant data. Model Predictive Control (MPC) algorithms (e.g. Dynamic Matrix Control). Applications of Linear Programming to determine optimal MPC setpoints respecting unit constraints. Computer simulation using the MATLAB MPC toolbox. Introduction to univariate controller performance assessment techniques.
Course Hours: 3 units; H(3-1.5)

Chemical Engineering 617

Modelling and Identification Advanced Control

First-principles dynamic models of complex chemical processes. Comparison of dynamic simulation models generated using MATLAB/Simulink with those imbedded in commercial process simulators. Consideration of operability in plant design. Introduction to time series analysis and closed-loop identification. Causality versus correlation. Multivariate regression methods for soft sensor design.

Course Hours: 3 units; H(3-1.5)

Chemical Engineering 619

Special Problems

Advanced studies on specialized topics in chemical, petroleum, biochemical and environmental engineering.
Course Hours: 3 units; H(3-0)
MAY BE REPEATED FOR CREDIT

Chemical Engineering 620

Graduate Project

Individual project in the student's area of specialization under the guidance of a faculty member. A written proposal, one or more written progress reports, and a final written report are required. An oral presentation is required upon completion of the course. Open only to students in the MEng (course-based) program.
Course Hours: 6 units; F(0-4)
Prerequisite(s): Consent of the Department Head or Associate Head Graduate Studies.
Antirequisite(s): Credit for both Chemical Engineering 620 and 699 will not be allowed.

Chemical Engineering 621

Reservoir Simulation

Enhanced recovery modelling (generalized black-oil models, compositional and miscible), well treatment, grid orientation. New developments in gridding, thermal models, naturally fractured reservoirs, modelling of induced fractures (hydraulic and waterflood), reservoir geomechanics, and practical aspects of conducting simulation studies.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or 523.

Chemical Engineering 623

Chemical Reactor Design

Advanced study of design and operation of chemical reactors for both homogeneous and heterogeneous systems, batch, continuous flow stirred tank, tubular and multibed adiabatic reactors. Cold shot cooling in reactors. Optimal temperature gradients and yields. Catalyst effectiveness factors and optimal control with decaying catalysts. Analysis of sulphur plant reactor design including cost optimization.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Chemical Engineering 421.

Chemical Engineering 625

Advanced Topics in Heat Transfer

Diffusive and convective transport of heat. Analytical and approximate solutions to steady state and transient conduction and convection problems. Superposition techniques. Forced convection of heat in laminar and turbulent regimes.

Course Hours: 3 units; H(3-0)

Chemical Engineering 627

Chemical Process Simulation

Object oriented programming applied to the design of a steady state chemical process simulator via the sequential modular approach and by the equation-based approach. Material and energy balances for systems of process units.
Course Hours: 3 units; H(3-1.5)

Chemical Engineering 629

Secondary and Tertiary Recovery

Displacement processes for improved recovery of hydrocarbons. Waterflooding, gas flooding, solvent flooding and chemical flooding. Performance prediction techniques. Comparative economics.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 525.

Chemical Engineering 631

Advanced Topics in Fluid Mechanics

Constitutive equations for viscous flow and methods of solution. Laminar, transition and turbulent flows. Hydrodynamic stability. Vortices. Boundary layers.
Course Hours: 3 units; H(3-0)

Chemical Engineering 633

Chemical Thermodynamics

Advanced application of thermodynamic principles. Calculation of thermodynamic properties; ideal and non-ideal solution theory; calculation of phase equilibria; properties of reacting mixtures.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Chemical Engineering 427.

Chemical Engineering 639

Applied Numerical Methods in Engineering

Numerical solution of systems of linear and non-linear algebraic equations, eigenvalue problems. Numerical solution of systems of ordinary and partial differential equations. Initial value and boundary value problems. Finite difference and finites element methods. Numerical stability.
Course Hours: 3 units; H(3-0)
Notes: Knowledge of a programming language and undergraduate-level numerical methods is necessary.

Chemical Engineering 643

Air Pollution Control Engineering

Introduction to air quality and air pollution. Energy and air pollution. Fossil fuel combustion and related air pollution. Industrial air pollution control. Control of particulate matter. Control of VOCs, SOx, and NOx. Adsorption, absorption and biofiltration of air pollutants. GHG emission control. Recent advances on related topics.
Course Hours: 3 units; H(3-0)
Antirequisite(s): Credit for both Chemical Engineering 643 and Environmental Engineering 641 will not be allowed.
Also known as: (Environmental Engineering 641)

Chemical Engineering 645

Industrial and Produced Wastewater Treatment

Sources and characterization of industrial wastewater. Treatment objectives and regulations. Unit and process design. Physical/chemical treatment including sedimentation, coagulation, filtration, absorption, adsorption, ion exchange, membrane processes and pH adjustment.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Chemical Engineering 645 and Environmental Engineering 661 will not be allowed.
Also known as: (Environmental Engineering 661)

Chemical Engineering 647

Thermal Recovery Methods

Oil sands and heavy oil resources. Fluid and rock properties. Heat transfer processes in porous media. Comparative analysis of viscous oil recovery methods: steam flooding, cyclic steam stimulation, in-situ combustion and steam-assisted-gravity-drainage. Surface equipment and operation. Laboratory and field performance evaluation of thermal recovery methods. Process economics.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or 523.

Chemical Engineering 649

Naturally Fractured Reservoirs

Classification and characterization of naturally fractured reservoirs. Drilling and completion methods. Production characteristics. Tight gas reservoirs. Reserve estimation. Emphasis is placed on the relationship between geology, log interpretation, well testing, and primary-secondary recovery of hydrocarbons from naturally fractured reservoirs.
Course Hours: 3 units; H(3-0)

Chemical Engineering 651

Engineering Fuel Cells

Overview of Fuel Cells. Comparison of fuel cells with other energy technologies. Types of fuel cells; electrochemical reactions; materials and balance of plant.
Course Hours: 3 units; H(3-0)
Also known as: (formerly Chemical Engineering 619.51)

Chemical Engineering 653

Horizontal Wells for Petroleum Production

Drilling and completion methods for horizontal wells; mathematical analysis of steady state flow to horizontal wells and well combinations; pseudo steady state and constant well bore pressure models; theoretical comparisons of predicted performance and coning behaviour of horizontal and vertical well patterns; performance in fractured reservoirs; potential for horizontal wells in heavy oil and bitumen production; basic conceptual ideas of steam-assisted gravity drainage.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or Petroleum Engineering 523.

Chemical Engineering 657

Advanced Reservoir Engineering

Formulation and solution of reservoir-engineering problems including combination of variables, Laplace transform, approximate Integral methods, and solution methods of moving boundary problems. Examples from thermal processes (e.g. hot waterflooding, SAGD), different recovery mechanisms (e.g. imbibition, expansion drive, solution-gas drive), well testing problems and naturally fractured reservoirs.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or Petroleum Engineering 523.
Notes: Prior knowledge of reservoir engineering and analytical solution methods of differential equations is necessary.

Chemical Engineering 659

Advanced Cell and Tissue Engineering

Current challenges in tissue engineering. Focus on specific tissues. Course topics include a brief biology review, cell fate processes, stem cells, tissue microenvironments and mass transfer, biomaterials, bioreactors, and clinical delivery of tissue engineered constructs.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Department.
Notes: Credit for both Chemical Engineering 659 and Biomedical Engineering 619.06 will not be allowed.

Chemical Engineering 661

Geostatistics for Reservoir Characterization

Statistical/probability concepts, exploratory data analysis, spatial structural analysis, estimation theory (Kriging), integration of auxiliary information and conditional stochastic simulation. Special emphasis on reservoir characterization and the particular problems encountered in that area. The geostatistical methodology for reservoir characterization will be demonstrated on a fluvial reservoir example.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or Petroleum Engineering 523.
Notes: Open to graduate Chemical Engineering, Civil Engineering and Geophysics students, and Geology graduate students with sound quantitative skills. Prior exposure to statistical/probability theory is required.

Chemical Engineering 665

Wastewater Issues for the Oil and Gas Industry

Produced water characteristics, regulations governing produced water management, management options. Technologies used for produced water treatment, novel/emerging technologies. Process design approaches and comparative evaluation of various technologies. Case Studies.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Chemical Engineering 665 and Environmental Engineering 665 will not be allowed.
Also known as: (Environmental Engineering 665)

Chemical Engineering 677

Advanced Topics in Oil and Gas Production

Problems related to production of conventional oil, heavy oil and natural gas; analysis of the interactions of oil, water and gas, effects of fluid properties, rock structure and capillary, gravity and viscous forces acting on the reservoir system; application to the design of improved oil and gas recovery methods. New processes in oil and gas recovery.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Petroleum Engineering 429 or Petroleum Engineering 523.

Chemical Engineering 687

Petroleum Economics

Economic principles and risk management practices in the petroleum industry. Project selection; investment ranking; budgeting; and portfolio development. Decision making under uncertainty and risk.
Course Hours: 3 units; H(3-0)
Also known as: (formerly Chemical Engineering 619.87)

Chemical Engineering 689

Drilling Advances, Modelling and Simulation

Application of drilling optimization simulator tools to optimize rate of penetration and minimize cost. Drilling hydraulics simulation, directional drill string torque and drag calculations, drilling fluid selection and analysis and real time drilling rate analysis.
Course Hours: 3 units; H(3-0)
Antirequisite(s): Credit for both Chemical Engineering 689 and 619.91 will not be allowed.

Chemical Engineering 698

Reservoir Characterization for Field Development

A team-based, integrated reservoir description experience working with geophysical, geological, petrophysical, and engineering data to produce a field development plan.
Course Hours: 6 units; F(3-0)
Prerequisite(s): Chemical Engineering 621, Geology 697 and Human Resources and Organizational Dynamics 789 or equivalent.
Notes: This course is intended for graduate students in the Master of Engineering with Reservoir Characterization Specialization.
Also known as: (Geology 698) (formerly Chemical Engineering 619.95 and 619.96)

Chemical Engineering 699

Special Project

Project study conducted under the guidance of a faculty member and intended to expose the student to the tools, techniques and basic aspects of research. A written comprehensive report and one or more written progress reports are required.
Course Hours: 3 units; H(0-4)
Prerequisite(s): Consent of the Department Head or Associate Head Graduate Studies.
Antirequisite(s): Credit for both Chemical Engineering 699 and 620 will not be allowed.
MAY BE REPEATED FOR CREDIT

Chemical Engineering 701

Experimental Design and Error Analysis

Statistical analysis and design of engineering experiments. Random variables and sampling distributions; estimation and hypothesis testing; concepts of central tendency, variability, confidence level; correlation, regression and variation analysis; robust estimation; experiments of evaluation; experiments of comparison; factorial experiments (analysis of variance); experimental designs (involving randomization, replication, blocking and analysis of covariance).
Course Hours: 3 units; H(3-0)
Antirequisite(s): Credit for more than one of Chemical Engineering 701, Environmental Engineering 621, Chemical Engineering 619.45 and 619.82 will not be allowed.
Notes: Intended for MSc/PhD students. MEng students may be able to register with Instructor's Permission.
Also known as: (Environmental Engineering 621)

Chemical Engineering 703

Advanced Mathematical Methods in Engineering

Review of theory of linear algebra. Review of ordinary differential equations: linear, non-linear; series solutions; special exact solutions; applications. Partial differential equations: geometric interpretation; characteristic curves; separation of variables; the Sturm-Liouville problem and Fourier series; eigenfunction expansion; Fourier, Laplace and Hankel transforms; self-similarity; Green's function; applications.
Course Hours: 3 units; H(3-0)
Antirequisite(s): Credit for both Chemical Engineering 703 and 619.83 will not be allowed.
Notes: Intended for MSc/PhD students. MEng students may be able to register with Instructor's Permission.

六九色堂

UofC