Civil Engineering ENCI

ENCI 337 402 413 423 451 461 471 473 481 502 504 508 513 523 551 557 565 570 571 575 581 595 597 605 607 611 615 617 619 621 623 627 629 633 635 637 639 641 643 645 647 653 655 657 659 665 667 669 671 673 689 691 693 695 697 699 703 707 709 711 715 741 745 747 749 751 753

Instruction offered by members of the Department of Civil Engineering in the Schulich School of Engineering.

Department Head 鈥� R.C.K. Wong

Associate Head 鈥� J.L.H. Grozic

Senior Courses

Civil Engineering 337

Tools for Civil Engineering Design

A course utilizing computer tools to solve practical Civil Engineering problems. The course concentrates upon the use of spreadsheets, but also involves interaction with databases, computer graphics and computer programming for analysis, design and reporting. Problems will normally be derived from several core Civil Engineering sub-disciplines.
Course Hours: 3 units; H(2-3)
Prerequisite(s): Engineering 233.

Civil Engineering 402

Water Resources Engineering

Review of basic concepts of fluid motion; Surface resistance and boundary layer theory, drag and lift, turbo machinery, flow in open channels, flow through pipes and networks, hydraulic structures and water; Topics in engineering hydrology; Reservoir modelling.
Course Hours: 3 units; H(3-2)
Prerequisite(s): Mechanical Engineering 341.

Civil Engineering 413

Introduction to Civil Engineering Materials

Engineering properties, materials science and applications of the Civil Engineering materials: strength, elasticity, fatigue, creep, shrinkage, durability, thermal deformation; introduction to fracture mechanics; Microstructure and fundamental principles underlying performance; mass transport processes, corrosion and phase transformations causing deterioration.聽 Practical examples from difference materials sectors: steel, aggregates, cement, Portland cement concrete, masonry, asphalt concrete, natural and synthetic polymers.
Course Hours: 3 units; H(3-5/2)
Prerequisite(s): Engineering 201.

Civil Engineering 423

Geotechnical Engineering I

Identification and classification of soils; soil compaction; seepage; effective stress concept; stresses in a soil mass; settlement; one dimensional consolidation; shear stress and strength; introduction to slope stability; selected laboratory and design exercises with computer applications.
Course Hours: 3 units; H(3-1T-2)
Prerequisite(s): Geology 471.

Civil Engineering 451

Structural Engineering I

Review of analysis of statically determinate structures. Indeterminate structures, analysis of continuous beams using the three-moment equation. Structural building materials. Principles of structural analysis and design process. Loads on structures. Structural systems. Idealized models. Load paths for gravity lateral loads. Structural safety. Philosophy of limit states design. Design principles for main structural members in steel, plain and reinforced concrete/masonry, and timber.
Course Hours: 3 units; H(3-2T-1/2)
Prerequisite(s): Civil Engineering 461.

Civil Engineering 461

Mechanics of Solids and Structures

Analysis of statically determinate structures: reactions, member forces in trusses, bending moment, shearing force and axial force diagrams for frames; Introduction to indeterminate structures; Effects of moving loads, influence lines, Muller-Breslau principle; Determination of displacements using moment area theorems, energy theorems and virtual work; Maxwell's theorem; Normal stresses in non-symmetric sections; principal axes, shear centre; plastic torsion of circular shafts, torsion of non-circular sections; Principal stresses, failure theories; Elastic buckling of columns.
Course Hours: 3 units; H(3-1.5T)
Prerequisite(s): Engineering 317.

Civil Engineering 471

Project Management I

Introduces techniques that provide rational solutions to a range of project management decisions encountered in engineering projects. Students are expected to gain a detailed understanding of some; of the techniques, tools and processes available and their application in planning and managing engineering and construction projects; The course covers project management fundamentals including project planning and scheduling techniques, cash flow forecasting, performance evaluations and decision analysis; Introduction to operations research.
Course Hours: 3 units; H(3-2)

Civil Engineering 473

Transportation Engineering I

Systems approach in transportation engineering and planning; Goals and objectives of urban and regional transportation planning; Introduction to transportation modes; Transportation demand models; Highway Alignment; Fundamentals of traffic flow; Highway capacity and level of service; Roadway intersection design and operation; Urban transportation technologies; Environmental and energy impacts of transportation.

Course Hours: 3 units; H(3-2)
Prerequisite(s): Civil Engineering 471 and Engineering 319 or consent of the instructor.

Civil Engineering 481

Environmental Engineering

Analyse and develop civil engineering solutions, at a conceptual level, to human health and environmental problems associated with human activities, fundamental aspects of air, water and land pollution, water quality assessment and control, environmental aspects of non-renewable energy development, introduction to sustainability concepts in construction and transportation, solid waste management technologies, introduction to land pollution prevention and control.
Course Hours: 3 units; H(3-2)
Prerequisite(s): Chemistry 209 and Mechanical Engineering 341.

Civil Engineering 502

Civil Engineering Aspects of Sustainable Communities

Definition of sustainability; global urbanization; emissions from transportation systems; economics of urban development from a civil infrastructure point of view, water/wastewater, land use/transportation; public transportation; travel demand management for sustainability; construction industry - energy use and emissions.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 473 and 481.

Civil Engineering 504

Risk and Safety in Civil Engineering

Introduces fundamentals of uncertainty, risk, safety and decision-analysis in civil engineering. The course covers risk and safety issues related to planning, design, construction and operations in civil engineering. Advanced topics include Bayesian analysis, information entropy, extreme value distributions, and approximate means and variances of functions of stochastic variables. These issues are covered in the context of construction, disaster mitigation, environmental, geotechnical, structures, transportation, water resources or other civil engineering disciplines.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 471 and Engineering 319.

Civil Engineering 508

Environmental Aspects of Energy

Environmental assessment and management in the energy sector. Ecological footprint introduction. Site investigation, field techniques and program implementation, remedial planning and design, cost and time analysis, physical, chemical and biological remediation techniques, biomass and waste to energy, energy use and emissions in transportation systems, energy efficiencies and emissions in building construction, assess problems with energy use from an environmental setting, develop and apply engineered solutions, ecological and environmental footprints of energy industries.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 481.

Civil Engineering 513

Structural Concrete Materials and Design

Practical examination of concrete mix design (Portland cement), processes and systems to improve performance and sustainability of Civil Engineering structures. Flexural design in reinforced concrete. Design of continuous beams and one-way slabs using moment coefficients. Shear design. Bond and development. Serviceability. Two-way slab systems: direct design method, punching shear. Columns. Design principles for concrete members reinforced with Fiber-Reinforced Polymers. Use of computer software for analysis and design of simple concrete structures.
Course Hours: 3 units; H(3-2T)
Prerequisite(s): Civil Engineering 413 and 451.

Civil Engineering 523

Geotechnical Engineering II

Sub-surface investigations; soil shear strength, critical states and laboratory tests; shallow and deep foundations in sands and clays; bearing capacity and settlement of structures; lateral earth pressures and retaining structures; seepage analysis; slope stability analysis, selected laboratory design exercises, solution to slope stability and other problems using computer programs.
Course Hours: 3 units; H(3-1T-2/2)
Prerequisite(s): Civil Engineering 423.

Civil Engineering 551

Structural Engineering II

Review of analysis of statically determinate structures. Static and kinematic indeterminacy. Principle of superposition. The force/flexibility and displacement/stiffness methods for the analysis of statically indeterminate structures. Calculation of displacements. Inelastic buckling of columns. Use of computers for the analysis of plane frames and grids. Plastic analysis of continuous beams, frames and plates. Yield line theory.
Course Hours: 3 units; H(3-2T)
Prerequisite(s): Civil Engineering 451.

Civil Engineering 557

Structural Steel Design

Principles of limit states design of steel structures. Floor systems, resistance to horizontal forces. Properties of steel. Tension members. Eccentrically-loaded bolted and welded connections; connection details. Axially-loaded compression members. Laterally unsupported beams. Members subjected to bending and axial forces; beam-column effect. Composite beams. Plate girders. Design of a simple steel structure and use of available computer software to assist in analysis and design of steel structures.
Course Hours: 3 units; H(3-2T)
Prerequisite(s): Civil Engineering 451 and 551.

Civil Engineering 565

Project Management II

Introduces fundamentals of engineering and construction management techniques, tools and processes. The course covers understanding of design and contract documents, estimating and cost control; project organizations, design of temporary facilities including formwork and safety related matters, construction processes, dispute resolution, social, economic and environmental impacts, regulatory requirements, project completion and commissioning.

Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 471.

Civil Engineering 570

Group Design Project

Team design project applying engineering and project management principles to civil engineering design problems; Consideration of technical, resource allocation and business aspects of project; Development of project scope, design, specifications, scheduling and documentation; Elements of practical team management and leadership; Specific guidance provided by academic and industry advisors.

Course Hours: 6 units; F(0-4)
Prerequisite(s): Civil Engineering 402, 413, 423, 451, 461, 471, 473, and 481.
Notes: Departmental consent will only be granted in exceptional cases if students are missing no more than one of the courses listed above. Concurrent enrolment in Civil Engineering 570 and one or more of Internship 513.01, 513.02, 513.03, and 513.04 will not be allowed.

Civil Engineering 571

Introduction to Road Safety

Theory and evidence in accident analysis and prevention. Topics include Haddon's matrix, crash data analysis, traffic enforcement, road safety advertising, fleet safety, road safety audits, vehicle safety and program evaluation.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 473 and Engineering 319.

Civil Engineering 575

Transportation Engineering II

This course is intended to introduce students to the fundamentals of how various transportation systems are designed and operated.聽 Topics to be covered include: public transit design and operation, highway engineering and design, airport design, traffic system design and operations, before and after studies and Intelligent Transportation Systems.

Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 471 and 473 and Engineering 319 or equivalent.

Civil Engineering 581

Environmental Engineering II

Water and wastewater quantities and quality, water distribution and wastewater collection systems, hydraulic considerations, design of sanitary sewers, storm drainage systems, physical, chemical, and biological processes for water and wastewater treatment; aeration, coagulation, flocculation, sedimentation, single and multi-media filtration, disinfection, activated sludge system and trickling filter, adsorption, reverse osmosis, membrane filtration, advanced oxidation, sludge processing and disposal, industrial water and wastewater treatment, water conservation, reuse and recycling.

Course Hours: 3 units; H(3-1)
Prerequisite(s): Civil Engineering 481 and Mechanical Engineering 341.

Civil Engineering 595

Special Topics

Current topics in Civil Engineering.
Course Hours: 3 units; H(3-1)
Prerequisite(s): Consent of the Department Head.
MAY BE REPEATED FOR CREDIT

Civil Engineering 597

Civil Engineering Project I

Individual work on an assigned Civil Engineering topic under the supervision of a faculty member. The project will normally involve a literature review, theoretical and laboratory or field work. Submission of a mid-term progress report defended orally and a final report.
Course Hours: 3 units; H(0-5)
Notes: Open to students who have completed the third year Civil Engineering program with a GPA of 3.00 or better and/or Department Heads approval.

Graduate Courses

Registration in all courses requires the approval of the Department of Civil Engineering. For a more complete listing of Environmental Engineering graduate courses look under Environmental Engineering.

Civil Engineering 605

Research Seminar I

Introduction to health and safety. Communication styles, supervisory relationships, and respect in the lab. Presentation planning and voice projection. Introduction to reference gathering and management. Awareness of plagiarism and academic integrity. Introduction to writing of technical abstracts.
Course Hours: 3 units; H(3-0)
NOT INCLUDED IN GPA

Civil Engineering 607

Research Seminar II

Development of presentation skills. Writing and publishing scientific manuscripts. Introduction to peer review process, thesis defence and candidacy. Introduction to engineering design. Post-graduation career development including intellectual property, membership in professional organizations, and networking basics.
Course Hours: 3 units; H(3-0)
NOT INCLUDED IN GPA

Civil Engineering 611

Bituminous Materials

Origin of bituminous materials. Production, composition, and internal structure. Natural and petroleum-refined bituminous materials. Characteristics of bituminous materials and their measurement. Basic material and rheological tests. Application of bituminous materials in asphalt paving technologies. Hot mixes and asphalt emulsions. Paving mix design, properties and testing. Main failure modes of asphalt pavements. Industrial asphalts. Environmental impacts of asphalt technologies.
Course Hours: 3 units; H(3-1)

Civil Engineering 615

Rheology of Engineering Materials

Elements of tensor calculus. Constitutive equations. Linear and non-linear viscoelasticity. Dielectric properties of materials. Rheometry. Temperature and molecular mass dependencies of material functions. Relations between material functions. Microstructure and rheology of materials.
Course Hours: 3 units; H(3-0)

Civil Engineering 617

Fracture of Civil Engineering Materials

Cohesive strength; plasticity. Fracture mechanics in relation to structural steel, stress intensity, fracture toughness, energy release rate, LEFM, COD, J-Integral, R-Curve, fatigue. Compressive fracture of concrete, masonry and rocks; cracking patterns, fracture theories, damage models, test methods and effects.
Course Hours: 3 units; H(3-0)

Civil Engineering 619

Special Problems

Designed to provide graduate students, especially at the PhD level, with the opportunity of pursuing advanced studies in particular areas under the direction of a faculty member. Students would be required to consider problems of an advanced nature.
Course Hours: 3 units; H(3-0)
MAY BE REPEATED FOR CREDIT

Civil Engineering 621

Computer Analysis of Structures

Review of the displacement method of structural analysis, energy theorems, and transformation of force and displacement matrices. Computer analysis of framed structures: banded stiffness matrices, assemblage of stiffness matrices, displacement and support conditions and calculation of reactions, solution of banded equations. Structural symmetry, anti-symmetry and cyclic symmetry. Analysis of large structures by substructuring. Analysis of shear wall structures. Introduction to the finite element method: displacement functions, stiffness matrix formulation, consistent load vectors, isoparametric elements. Non-linear analysis: effect of axial forces combined with large displacements, geometric stiffness matrix, Newton-Raphson techniques, examples of geometric non-linearity, non-linear buckling, cable networks including membrane elements, analysis of structures made of non-linear materials. Structuring and composition of available structural analysis computer programs, and their applications.
Course Hours: 3 units; H(3-0)

Civil Engineering 623

Behaviour and Design of Reinforced Concrete Members

Behaviour and strength of reinforced concrete members; materials; safety; design of members subjected to flexure, compression, compression and flexure including biaxial bending, shear, torsion; bond and anchorage; slender columns; deep beams; serviceability; rotation capacity; relation between results of research and current design codes.
Course Hours: 3 units; H(3-0)

Civil Engineering 627

Serviceability of Concrete Structures: Advanced Topics

Material properties affecting serviceability: creep and shrinkage of concrete and relaxation of prestressed steel. Displacement method of analysis of strains and stresses due to temperature, creep and shrinkage; composite sections; cracked sections. Time-dependent internal forces; effects of loading, prestressing and construction in stages. Displacements of cracked members; crack spacing; stabilized cracks; force-induced and displacement-induced cracking. Deflections of beams, frames, slabs and floor systems. Non-linear effects of cracking on internal forces. Effects of temperature. Fatigue of cracked prestressed members. Corrosion; effects of cracking. Serviceability considerations of miscellaneous structures, e.g., bridges, water-retaining structures and pavements.
Course Hours: 3 units; H(3-0)

Civil Engineering 629

Computational Modelling of Concrete Structures

Discussion of linear finite element analysis; non-linear analysis and iterative techniques; constitutive relations and failure theories; modelling of reinforcement and prestressing; cracking models and post-cracking behaviour; tension stiffening and strain softening; models for shear transfer; time-dependent effects of creep, shrinkage and temperature; behaviour under cyclic loading and dynamic effects; numerical examples and computer applications on analysis of beams, frames, slabs, shear panels and walls, thin shells, axisymmetric solids and three dimensional structures.
Course Hours: 3 units; H(3-0)

Civil Engineering 633

Fibre Reinforced Polymers for Construction and Repair of Structures

Properties and behaviour of various types of Fibre-Reinforced Polymers (FRP) materials. Limit States Design, procedures and design philosophy of structures reinforced or strengthened with FRP. Flexural and shear design. FRP systems for flexural and shear strengthening of structures. Axial strengthening of columns. Concrete prestressed with FRP. Durability and fire resistance, blast mitigation and repair using FRP. Case studies and field applications.
Course Hours: 3 units; H(3-0)

Civil Engineering 635

Behaviour and Design of Prestressed Concrete Bridges and Other Structures

Forces due to prestressing in statically indeterminate structures such as continuous beams, frames, slabs, using load balancing method, force method and prestressing influence coefficients. Limit analysis of continuous prestressed concrete structures. Design of prestressed flat slabs. Initial and time-dependent deflections. Effect of creep and shrinkage in statically indeterminate structures; effect of differential settlement; creep behaviour of structures made continuous by cast-in situ concrete. Discussion of various types of prestressed concrete bridges; selection of cross-section, pier arrangement, abutments, approach slab, bearings. Loads. Design of skew and curved bridges. Cable layout in skew and curved bridges. Methods of bridge construction. Aesthetic considerations in bridge design.
Course Hours: 3 units; H(3-0)

Civil Engineering 637

Behaviour and Design of Prestressed Concrete Members

Flexural analysis and design of prestressed and partially prestressed concrete members based on stresses, deflections and strength. Design of members subjected to shear, torsion, compression or tension. Fire resistance. Composite members. Bond and anchorage zones. Prestressing losses and time-dependent deformations. Discussion of current design standards.
Course Hours: 3 units; H(3-0)

Civil Engineering 639

Structural Dynamics

Numerical analysis of simple systems; rigorous analysis of one-degree systems; lumped mass multi-degree systems and structures with distributed mass and load; approximate analysis and design methods; earthquakes, blast-resistant design, beams subjected to moving loads; calculation of results by analog and digital computer.
Course Hours: 3 units; H(3-0)

Civil Engineering 641

Seismic Analysis and Design

Introduction to seismology, ground movements, typical accelograms. Response spectra for linear and non-linear responses, role of damping and inelastic behaviour. Equivalent lateral load for design, code requirements. Structural design concepts to mitigate seismic effects. Design of steel structures for earthquake motions. Design of concrete frames and walls for earthquake motions.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Civil Engineering 639.

Civil Engineering 643

Structural Masonry Design

Component materials and their properties, masonry properties, quality control, plain and reinforced masonry, beams, walls, slender walls, columns, load-moment interaction curves, concentrated load bearing, shear load distribution, shear walls, code provisions, building envelope, detailing, differential movement, geometric walls, prestressed masonry, arches.
Course Hours: 3 units; H(3-0)
Antirequisite(s): Not open to students with credit in Civil Engineering 553 or 595.05.

Civil Engineering 645

Risk Analysis

The objective of this course in engineering risk analysis and risk assessment is to familiarize students with the principles and techniques of quantitative risk analysis. Key focus points are the treatment of uncertainties, the attitude of conservatism, risk perception, the careful use of quantitative risk measures, and a discussion of the dangers tasks facing risk-based decision makers. Includes: Hazards, risk, risk analysis, risk assessment; risk measures; probability, uncertainty modelling, stochastic variables; using and misusing data, reliability, tails; risk assessment frameworks, models in health and environmental risk analysis, models in engineering risk analysis; risk perception, risk comparison; and practical case studies.
Course Hours: 3 units; H(3-0)

Civil Engineering 647

Structural Reliability Techniques

The concepts of risk and reliability, uncertainties, and engineering decision making. Focuses on both aspects of uncertain systems, mainly structures, but also soils and environments, namely analysis and design. Techniques for structural reliability-based design and optimization are discussed and supplemented by practical applications.
Course Hours: 3 units; H(3-0)

Civil Engineering 653

Theory and Applications of the Finite Element Method

Conceptual framework of the finite element method with emphasis on applications to structural analysis: shape functions, continuity at nodes, numerical integration, matrix assembly. Scope of the method, use of basic equations of elasticity, displacement (stiffness) method of analysis. Sources of error and poor performance; mesh sensitivity; element types, their selection and behaviour. Applications in structural analysis, heat conduction and other non-structural problems; use of available finite element programs.
Course Hours: 3 units; H(3-0)

Civil Engineering 655

Numerical Methods for Modelling Geomaterials

Methods of theoretical analysis for solving partial differential equations associated with Geotechnical and Structural Engineering. Variational Principles, Principle of Virtual Work and Galerkin Method. Theory of finite element and focus on its computer implementation for analysis of engineering problems. Typical applications include two- and three-dimensional stress analysis, seepage flow, and coupled fluid flow-solid deformation problems. Advanced topics: numerical strategies for solving material and geometric non-linearities (plasticity and large deformations), poro-elasticity and plasticity, strain localization, and presentation of other numerical techniques such as finite difference, boundary element, discrete element methods.
Course Hours: 3 units; H(3-0)

Civil Engineering 657

Airport Planning and Engineering

Planning of airport systems; planning and design of the airfield; airside capacity and delay; air traffic control; planning and design of the passenger terminal; analysis of airport operations.
Course Hours: 3 units; H(3-0)

Civil Engineering 659

Sustainable Infrastructure

Sustainability and durability issues of structural materials; properties and uses of non-renewable and recycled materials; energy efficient design and green material selection; life cycle cost analysis. Constructability. Aesthetics. Infrastructure management, inventory, assessment/monitoring, performance and remaining service life. Preservation of existing infrastructure; repair and rehabilitation, strengthening and retrofitting to extend service life of structures. Structural composites: properties and applications to improve performance and sustainability of infrastructure.

Course Hours: 3 units; H(3-0)

Civil Engineering 665

Fundamentals of Soil Behaviour

Principle of effective stress in saturated soil, unsaturated soil and clay. Engineering properties of soils. Shear strength and deformation characteristics of soils in static, cyclic, drained and/or undrained loading. Laboratory testing of soils. One-dimensional consolidation, poro-elastic deformation, swelling mechanism, time-dependent deformation and soil contamination in soils.
Course Hours: 3 units; H(3-0)

Civil Engineering 667

Applied Rock Engineering

Engineering properties of intact rock and rock mass. Rock classification. Slope and underground excavation; groundwater flow in fractured rock; poro-elastic deformation analyses; hydraulic fracturing.
Course Hours: 3 units; H(3-0)

Civil Engineering 669

Permafrost Engineering

Development, characteristics and significance of permafrost, including the thermal and hydrological processes and resulting periglacial geomorphology and geotechnical implications. Contemporary topics in science and engineering of seasonally and perennially frozen ground.
Course Hours: 3 units; H(3S-3)
Antirequisite(s): Credit for both Civil Engineering 669 and Geography 689 will not be allowed. 聽聽聽

Civil Engineering 671

Advanced Foundation Engineering

Design and analysis of foundations. Spread footings, rafts, piled foundations. Marine foundations. Foundations in difficult soils. Embankments, retaining walls, excavations. Soil improvement. Soil liquefaction. Design problems and computer applications in foundation engineering.
Course Hours: 3 units; H(4-0)

Civil Engineering 673

Constitutive Laws for Geomaterials

Definition of a continuous medium. Description of deformable continuous media; concepts of stress, strain and their invariants. Constitutive equations geomaterials as a generic for soil, rock and concrete materials in civil engineering. Review of elasticity theory. Introduction to yielding, plastic flow and failure phenomena in geomaterials. Limit analysis with applications to both geotechnical and structural engineering. Stress-strain behaviour for both cohesive and granular materials. Constitutive models based on critical state theory will be presented. Other topics such as strain localization and fracture phenomena may be included as appropriate.
Course Hours: 3 units; H(3-0)

Civil Engineering 689

Advanced Project Management Practices and Principles

Advanced practices, tools and concepts in managing complex volatile or large projects. SMART project management based on best practices in diverse industries forms the basis of this course.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Civil Engineering 691, 697 and consent of the Program Director.

Civil Engineering 691

Fundamentals of Project Management

Application of management principles to the project environment; planning, control, scope, time and cost processes; project organization and human resource issues. Students review aspects of a current major capital project and submit and defend a project report.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Program Director.
Also known as: (Business and Environment 691)

Civil Engineering 693

Project Engineering Management

Role of the engineering manager in the project management team. The engineering firm, its organization and function; project development, engineering project control; design control; scope and estimate control; engineering interfaces with procurement and construction; engineering responsibility in project commissioning start-up and operations.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Program Director.

Civil Engineering 695

Project Construction Management

Role of the construction manager in the project management team; project options for the management of construction; managing the contractor's business; labour relations; claims; contractor(s) responsibility in project commissioning start-up and operations.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Program Director.

Civil Engineering 697

Project Planning and Control

Strategic and tactical planning; planning for scope, quality, time and cost; selection and implementation of project management information system; economic and risk analysis; planning for construction labour relations.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Program Director.

Civil Engineering 699

Law for Project Managers

Legal issues related to the effective management of projects. Introduction to the legal system and processes; environmental law; intellectual property non-disclosure; professional liability; contract law; strategic alliances; employment law; the builder's lien act. Cases are reviewed and students are expected to complete a number of assignments requiring research into case law.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Program Director.
Notes: This course may not be taken for credit towards the JD or LLM degrees.

Civil Engineering 703

Fundamentals of ITS and Transportation System Performance

Definition of ITS, with particular emphasis on advanced traffic management and control and advanced traveler information issues; traffic assignment and dynamic traffic assignment, traffic simulation tools; various traffic flow models: from microscopic to macroscopic traffic flow theory; traffic and incident management; surface street control; freeway control.
Course Hours: 3 units; H(3-0)
Prerequisite(s): An undergraduate degree in engineering or instructor approval.

Civil Engineering 707

Theory of Transport Demand Modelling

Modelling for transport planning; data in transport modelling; trip generation modelling; trip distribution modelling; modal split modelling; direct demand models; traffic assignment; equilibrium in transport modelling; discrete-choice models; specification and estimation of logit models; aggregation issues; simplified transport demand models; model updating and transferability.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Department.

Civil Engineering 709

Practice of Transport Demand Modelling

Sample enumeration modelling; practical aspects of logit model estimation and calibration; disaggregate choice behaviour data; practical four-step transport demand modelling using conventional software packages; application of computer-based network assignment models.
Course Hours: 3 units; H(2-4)
Prerequisite(s): Civil Engineering 707.

Civil Engineering 711

Advanced Analysis and Modelling of Public Transit Systems

Role of public transport in a city; concepts of public and private benefits; economies of scale; main modes of urban public transport systems: rail, bus, van and other vehicles; advanced mathematical modelling of mode of operation, route alignment, access, station and stop location, transfer protocols, time table, vehicle and fleet size, reliability; concepts of utility and value of time; detailed functional design and optimization of a bus route, rail line; bus, rail and metro networks.
Course Hours: 3 units; H(3-0)
Prerequisite(s): An undergraduate degree in engineering or instructor approval.

Civil Engineering 715

Transport Economics

Economic characteristics of transport; movement and location; transport demand; direct costs of transport; the value of travel time; external costs of transport; shadow prices; pricing of transport services; containment of external costs of transport; private and public sector investment analysis in transport; transport and economic development; transport policy.
Course Hours: 3 units; H(3-0)
Prerequisite(s): Consent of the Department.

Civil Engineering 741

Biological Processes for Wastewater Treatment

Specialized biological wastewater treatment processes for removal of impurities not effectively removed by conventional secondary wastewater treatment systems, such as nutrients (e.g. nitrogen and phosphorus), residual organics, residual solids, bacteria and viruses.聽 Wetlands.聽 Activated sludge modelling. Biological nutrient removal. Sludge management. Disinfection.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Civil Engineering 741 and Environmental Engineering 663 will not be allowed.
Also known as: (Environmental Engineering 663)

Civil Engineering 745

Hazardous Waste and Contaminated Sites Management

Integrated waste management. Functional and fundamental properties of hazardous waste. Toxicological properties of contaminants. Contaminant release mechanisms. Fate and transport of contaminants in the environment. Contaminated site assessment principles. Quantitative human health risk assessment (QHHRA) as applied to contaminated sites. Hazard identification, exposure pathway analysis, risk characterization. Risk management and site remediation. Methods of hazardous waste treatment and contaminated site remediation. Secure land disposal of hazardous waste and contaminated soils and sludges.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Civil Engineering 745 and Environmental Engineering 655 will not be allowed.
Also known as: (Environmental Engineering 655)

Civil Engineering 747

Contaminated Soil Remediation

Overview of soil remediation engineering. Contaminant partitioning in air, water and gas phases. Phases of site assessments, Physical and chemical treatment processes, soil vapour extraction, air sparging, soil washing, soil flushing, thermal desorption and incineration, solidification and stabilization, vitrification, biological treatment processes, bioremediation kinetics, ex situ and in situ techniques. Liquid phase bioremediation as it pertains to soil remediation.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Civil Engineering 747 and Environmental Engineering 653 will not be allowed.
Also known as: (Environmental Engineering 653)

Civil Engineering 749

Environmental Aspects of Waste Disposal Systems

Soil-chemical interactions and implications in waste disposal system design; landfill design principles; leachate production, leachate migration in the unsaturated/saturated zones; analytical and numerical solution of flow and transport equations; applications and case studies of groundwater contamination; design and construction of barrier systems; bioreactor landfills; landfill closure issues; greenhouse gas control systems.
Course Hours: 3 units; H(3-0)
Notes: Credit for both Civil Engineering 749 and Environmental Engineering 651 will not be allowed.

Civil Engineering 751

Snow Avalanche Hazard Mitigation

Avalanche motion and protection including avalanche terrain, frictional flow, impact pressures, avalanche risk for fixed structures, elements of structural defence, and run-out estimation based on statistical models, dynamic models, air photo interpretation, field studies of vegetation and historical records.
Course Hours: 3 units; H(3-0)

Civil Engineering 753

Snow Avalanche Formation and Release

Snowpack properties and processes including meteorological and ground effects on the snowpack, energy balance at the snow surface, snowpack stratigraphy, metamorphism of snow grains, bonding, as well as spatial and temporal variability of the snowpack. Avalanche initiation including deformation and failure of weak layers, models of slab failure and fracture propagation. Concepts of snow stability, avalanche forecasting and avalanche risk for recreationists.
Course Hours: 3 units; H(3-0)

六九色堂

UofC